top of page

Kiwire 3.0 Administrator - Device & Controller Setup Guide

Kiwire 3.0 Administrator - Device & Controller Setup Guide

Cambium Networks Configuration for Kiwire Hotspot

Cambium Networks Configuration for Kiwire Hotspot

Prerequisites

Before integrating the controller with Kiwire, it is necessary that the controller and access point:

are connected to the Internet
are reachable on the network
have an IP address assigned to the a through DHCP or static

Note:

Kiwire-hostname or Kiwire-ip can be obtain by contacting our technical support for our cloud customer. For enterprise client the ip will be on premises Kiwire ip address.
Social network hostname list can be obtained from Social network whitelist guide

Part 1: Cambium cnMaestro configuration

Login to your Cambium cnMaestro controller

Go to WLANs > Configuration > AAA Servers
1. Authentication Server
  1. Host: Kiwire-hostname or Kiwire-Ip
  2. Secret: create a secret pass phrase
  3. Port: 1812
  4. Timeout: 3 seconds
  5. Attempts: 1
2. Accounting Server
  1. Host: Kiwire-hostname or Kiwire-ip
  2. Secret: secret same as authentication server
  3. Port: 1813
  4. Timeout: 3 seconds
  5. Attempts: 1
  6. Accounting Mode: Start-Interim-Stop
  7. Accounting Packet: ticked
  8. Interim Update Interval: 1800 seconds
3. Advanced Settings
  1. NAS-Identifier: AP MAC address with capital letters and colon
  2. Dynamic Authorization: ticked
  3. Dynamic VLAN: ticked
  4. Called Station ID: AP-MAC:SSID

Omaya 3.0 Administrator > Quick Setup > Dashboard

Documentation

KIWIRE DOCUMENTATION

All Documentation

Login & Dashboard

Captive Portal User Error

Device & Controller Setup

Equipment Comparison Chart

Device & Controller Setup Guide Device Configuration – How to Create a Group with Bandwidth Capping

Device Configuration – How to Create a Group with Bandwidth Capping for FortiOS

Go to Account > Profile, create a profile with any name. In this example, we create a profile name Forti Wi-Fi using Free profile type.

Go to Policy > Radius Attribute, add a new Fortinet-Group-Name radius attribute.
In FortiWiFi go to User and Device > User > User Group and create user group as below.
Then under Policy & Objects > Objects > Traffic Shapers, create a new profile for the Traffic Shaper.
Finally, create a policy with the user group that we have created and enable the traffic shaping.

Related Post

Device & Controller Setup Guide - Cambium cnMeastro Configuration for Kiwire

Part 1: Cambium cnMaestro configuration Go to WLANs > Configuration > AAA Servers i. Authentication Server Host: kiwire ip address or...

Device & Controller Setup Guide Device Configuration – How to Create a Group with Bandwidth Capping

Device Configuration – How to Create a Group with Bandwidth Capping for FortiOS Go to Account > Profile, create a profile with any name....

Device & Controller Setup Guide - Mikrotik Device Configurations for Kiwire Retail

Modules allowed for Kiwire Retail: 1. Configuration > Organisation Profile 2. Integrations > Social Network 3. Device > NAS 4. Login...

1

2 3 4 5

bottom of page