Kiwire 3.0 Administrator - Device & Controller Setup Guide
Kiwire 3.0 Administrator - Device & Controller Setup Guide
Cambium Networks Configuration for Kiwire Hotspot
Cambium Networks Configuration for Kiwire Hotspot
Prerequisites
​
Before integrating the controller with Kiwire, it is necessary that the controller and access point:
-
are connected to the Internet
-
are reachable on the network
-
have an IP address assigned to the a through DHCP or static
Note:
-
Kiwire-hostname or Kiwire-ip can be obtain by contacting our technical support for our cloud customer. For enterprise client the ip will be on premises Kiwire ip address.
-
Social network hostname list can be obtained from Social network whitelist guide
Part 1: Cambium cnMaestro configuration
-
Login to your Cambium cnMaestro controller
-
Go to WLANs > Configuration > AAA Servers
-
Authentication Server
-
Host: Kiwire-hostname or Kiwire-Ip
-
Secret: create a secret pass phrase
-
Port: 1812
-
Timeout: 3 seconds
-
Attempts: 1
-
-
Accounting Server
-
Host: Kiwire-hostname or Kiwire-ip
-
Secret: secret same as authentication server
-
Port: 1813
-
Timeout: 3 seconds
-
Attempts: 1
-
Accounting Mode: Start-Interim-Stop
-
Accounting Packet: ticked
-
Interim Update Interval: 1800 seconds
-
-
Advanced Settings
-
NAS-Identifier: AP MAC address with capital letters and colon
-
Dynamic Authorization: ticked
-
Dynamic VLAN: ticked
-
Called Station ID: AP-MAC:SSID
-
-
Omaya 3.0 Administrator > Quick Setup > Dashboard
Documentation
Omaya 3.0 Administrator > Master Data & System Setting > Venue Map
Omaya 3.0 Administrator - Master Data &
System Setting
Venue Map
The venue map analytics will provide you Heat map of user movement and crowd density of the selected venue floor plan. Depend on the number of sensor deployed you can have a zonal heat map or presence heat map. The presence heat map provide heat map of user density nearby the Wi-Fi AP while Zonal Edition uses triangulation method between all the sensor Wi-Fi AP and display the density of user within the venue. click on the view button to view the map.
The heat map will playback the crowd movement (Zonal Edition) or density only for presence. To access the venue map module click on Master Data > Venue Map from the navigation. On the venue map listing module you may search for specific user by using search field.
The field and its function description is listed below.
ADD NEW MAP
Click on “Add New Map” button and populate the required fields. Fill in the field with relevant information to complete the process.
The field and its function description is listed below.
UPDATE OR DELETE MAP VENUE
Click on update or delete icon from the venue map listing. If you clicked the update icon, the update screen be display where you can update the setting of the venue map. Click on the delete icon to delete the venue map. A prompt will be display to ask for your confirmation to proceed to delete the venue map. Please exercise with cautions as this not a reversible action.