Kiwire 3.0 Administrator - Device & Controller Setup Guide
Kiwire 3.0 Administrator - Device & Controller Setup Guide
Cambium Networks Configuration for Kiwire Hotspot
Cambium Networks Configuration for Kiwire Hotspot
Prerequisites
​
Before integrating the controller with Kiwire, it is necessary that the controller and access point:
-
are connected to the Internet
-
are reachable on the network
-
have an IP address assigned to the a through DHCP or static
Note:
-
Kiwire-hostname or Kiwire-ip can be obtain by contacting our technical support for our cloud customer. For enterprise client the ip will be on premises Kiwire ip address.
-
Social network hostname list can be obtained from Social network whitelist guide
Part 1: Cambium cnMaestro configuration
-
Login to your Cambium cnMaestro controller
-
Go to WLANs > Configuration > AAA Servers
-
Authentication Server
-
Host: Kiwire-hostname or Kiwire-Ip
-
Secret: create a secret pass phrase
-
Port: 1812
-
Timeout: 3 seconds
-
Attempts: 1
-
-
Accounting Server
-
Host: Kiwire-hostname or Kiwire-ip
-
Secret: secret same as authentication server
-
Port: 1813
-
Timeout: 3 seconds
-
Attempts: 1
-
Accounting Mode: Start-Interim-Stop
-
Accounting Packet: ticked
-
Interim Update Interval: 1800 seconds
-
-
Advanced Settings
-
NAS-Identifier: AP MAC address with capital letters and colon
-
Dynamic Authorization: ticked
-
Dynamic VLAN: ticked
-
Called Station ID: AP-MAC:SSID
-
-
Omaya 3.0 Administrator > Quick Setup > Dashboard
Documentation
Kiwire 3.0 Administrator > Devices & Configuration > High Availability
Kiwire 3.0 Administrator - Devices & Configuration
Configuration - High Availability
The high availability module is to configure the high availability capability of Kiwire platform. This module will provide fail over capability to the passive Kiwire system, at any point of time only one of the pair will be active. The high availability module will perform automatic synchronization of data base and media files between the cluster nodes via secure communication. To access the organisation profile module click on Configuration > High Availability from the navigation.
NOTE:
Please ensure both Kiwire units are licensed and running on same firmware.
The field and its function description is listed below.
Buttons
-
Generate Key – Click on Generate Key to generate the security key , on Master it will generate they key for slave field , you need to perform the same generate key function on slave and copy the key to the Master key field.
-
Reset Error – This will reset error count.
-
Revoke Keys – This will revoke all key stored on system, you will need to use “generate key “ function to generate new key and perform exchange between node.