Kiwire 3.0 Administrator - Device & Controller Setup Guide
Kiwire 3.0 Administrator - Device & Controller Setup Guide
Cambium Networks Configuration for Kiwire Hotspot
Cambium Networks Configuration for Kiwire Hotspot
Prerequisites
Before integrating the controller with Kiwire, it is necessary that the controller and access point:
-
are connected to the Internet
-
are reachable on the network
-
have an IP address assigned to the a through DHCP or static
Note:
-
Kiwire-hostname or Kiwire-ip can be obtain by contacting our technical support for our cloud customer. For enterprise client the ip will be on premises Kiwire ip address.
-
Social network hostname list can be obtained from Social network whitelist guide
Part 1: Cambium cnMaestro configuration
-
Login to your Cambium cnMaestro controller
-
Go to WLANs > Configuration > AAA Servers
-
Authentication Server
-
Host: Kiwire-hostname or Kiwire-Ip
-
Secret: create a secret pass phrase
-
Port: 1812
-
Timeout: 3 seconds
-
Attempts: 1
-
-
Accounting Server
-
Host: Kiwire-hostname or Kiwire-ip
-
Secret: secret same as authentication server
-
Port: 1813
-
Timeout: 3 seconds
-
Attempts: 1
-
Accounting Mode: Start-Interim-Stop
-
Accounting Packet: ticked
-
Interim Update Interval: 1800 seconds
-
-
Advanced Settings
-
NAS-Identifier: AP MAC address with capital letters and colon
-
Dynamic Authorization: ticked
-
Dynamic VLAN: ticked
-
Called Station ID: AP-MAC:SSID
-
-
Omaya 3.0 Administrator > Quick Setup > Dashboard
Documentation
Ubiquiti Networks Documentation
UAP
UAP Getting Started
UAP – Accounts and Passwords for Controller, Cloud Key, and Other Devices
UAP – Advanced Adoption of a “Managed By Other” Device
UAP – Device Adoption Methods for Remote UAP Controllers
UAP – Changing the Firmware of a UAP Device
UAP – How to Migrate from Cloud Key to Cloud Key or UDM
UAP – How to Manage & Upgrade the Cloud Key
UAP – Setting Up UAP for Beginners
UAP – How to Enable Remote Access for Remote Management
UAP – Performing a Wireless Site Survey
UAP – High Density WLAN Scenario Guide
UAP – How to Configure Auto Backup
UAP – How to Install and Update via APT on Debian or Ubuntu
UAP – Cloud Key’s Device Management Limit
UAP – How to Change the Cloud Key’s Controller Version via SSH
UAP – Install a UAP Cloud Controller on Amazon Web Services
UAP – UAP Status Meaning Definitions
UAP – Viewing Guest Connection Information
UAP – Communication Protocol Between Controller and UAP
UAP – Changing Default Ports for Controller and UAPs
UAP – Run the Controller as a Windows Service
UAP System Management
UAP – USG: How to Set a Static IP Reservation for a Client/UAP Device
UAP – Configuring Access Policies for Wireless Clients
UAP – How to Install & Upgrade the UAP Network Controller Software
UAP – How to Create and Restore a Backup
UAP – Migrating Sites with Site Export Wizard
UAP – Managing Broadcast Traffic
UAP – How to Uninstall the UAP Network Controller
UAP – Guest Network, Guest Portal, and Hotspot System
UAP – Server Hardware & Database Management
UAP – USG/UDM: Responding to a Threat Detection Alert
UAP – Network Controller: Regenerating an IDS/IPS Token
UAP – Network Controller: Association Failures
UAP – Adding SSH Keys to UAP Devices
UAP – Best Practices for Managing Chromecast/Google Home on UAP Network
UAP – How To Reload a UAS using the ISO and USB
UAP – How To Reload a UAS using the ISO and IPMI
UAP – RF Scan: Suggested Channels Feature
UAP – airTime: What’s Eating your Wi-Fi Performance?
UAP – Hotspot RADIUS Attributes
UAP – USG Firewall: How to Enable ICMP on the WAN Interface
UAP – Clearing Controller Statistics
UAP – system.properties File Explanation
UAP – Explaining the config.properties File
UAP – Configuring the SELFRUN State
UAP – How to Purchase UAP Elite
UAP – Elite Support Information
UAP – Managing UAP Cloud Controller Subscriptions
UAP – How to Export and Delete Device Data
(ARCHIVED) UAP – Install the UAP Controller on the UAP-Video NVR
UAP Configuration
UAP – UDM Pro: How to Access the UAP Controller by WAN IP or Hostname
UAP – USG: Configuring RADIUS Server
UAP – USG: How to Configure Custom DHCP Options
UAP – USG: How to Adopt a USG into an Existing Network
UAP – USG: Configuring Port Remapping
UAP – USW: Configuring Link Aggregation Groups (LAG)
UAP – USG/UDM: Configuring Internet Security Settings
UAP – USW: Configuring Spanning Tree Protocol
UAP – USG Advanced: Policy-Based Routing
UAP – USG/UDM VPN: How to Configure Site-to-Site VPN
UAP – Using Facebook Wi-Fi for Guest Authorization
UAP – USG/UDM: Configuring L2TP Remote Access VPN
UAP – USG Firewall: How to Disable InterVLAN Routing
UAP – 802.11 Basic & Supported Rate Controls
UAP – USG/UDM Addressing: How to Implement IPv6 with DHCPv6 and Prefix Delegation
UAP – USG/UDM: Introduction to Firewall Rules
UAP – How to Configure a Debian/Ubuntu Controller to use Oracle Java
UAP – Social Media Guest Authentication
UAP – How to Tune the Controller for High Number of UAP Devices
UAP – Group Configuration and Tags
UAP – USW: Configuring Access Policies (802.1X) for Wired Clients
UAP – USW: Powering a US-8 Switch and Connected Devices
UAP – Configuring Wireless Uplink
UAP – Best Practices for Legacy Configurations
UAP – USG/UDM: Port Forwarding Configuration and Troubleshooting
UAP – How To Use a Free Email Service as SMTP Server (Gmail)
UAP – Understanding and Implementing Minimum RSSI
UAP – Using VLANs with UAP Wireless, Routing & Switching Hardware
UAP – USG Advanced Configuration
UAP – Configuring Multiple Sites
UAP – How to Set Traffic Bandwidth Limits
(ARCHIVED) UAP – Controller Custom SSL
UAP – Using SYSTEM.CFG for Persistent Changes
UAP – Configuring Hotspot Payment-Based Authorization
UAP Troubleshooting
UAP – UDM and UDM-Pro Emergency Recovery UI
UAP – Troubleshooting Client-Specific Connectivity Issues
UAP – Troubleshooting Slow Wi-Fi Speeds
UAP – Troubleshooting “Managed by Other” Cloud Key Status
UAP – Troubleshooting Guest Portal Redirection
UAP – Troubleshooting Issues with Controller Backup Files
UAP – How to Reset Devices to Factory Defaults
UAP – Network Controller: Repairing Database Issues on the UAP Controller
UAP – Troubleshooting RADIUS Authentication
UAP – Verifying and Troubleshooting IPsec VPN on USG
UAP – Troubleshooting Offline Cloud Key and Other Stability Issues
UAP – Troubleshooting STUN Communication Errors
UAP – Identifying Wi-Fi Issues with Debugging Metrics
UAP – USG VPN: How to Implement Dead Peer Detection
UAP – USG Reporting: How to Enable Netconsole Debug Logging
UAP – Methods for Capturing Useful Debug Information
UAP – Troubleshooting Connectivity Issues
UAP – Cloud Key Emergency Recovery UI
UAP – Troubleshooting Device Adoption
UAP – Controller Fails to Start When Opened
UAP – How to Remove (Prune) Older Data and Adjust Mongo Database Size
UAP Hardware
UAP – UDM PRO: Hard Drive Compatibility
UAP – Access Point Comparison Charts
UAP – Introduction to Antenna Radiation Patterns
UAP – UAP Antenna Radiation Patterns
UAP – USW: Which SFP Modules Can be Used
UAP – Secondary Ethernet Ports on UAPs
UAP – LED Color Patterns for UAP Devices