Kiwire 3.0 Administrator - Device & Controller Setup Guide
Kiwire 3.0 Administrator - Device & Controller Setup Guide
Cambium Networks Configuration for Kiwire Hotspot
Cambium Networks Configuration for Kiwire Hotspot
Prerequisites
Before integrating the controller with Kiwire, it is necessary that the controller and access point:
-
are connected to the Internet
-
are reachable on the network
-
have an IP address assigned to the a through DHCP or static
Note:
-
Kiwire-hostname or Kiwire-ip can be obtain by contacting our technical support for our cloud customer. For enterprise client the ip will be on premises Kiwire ip address.
-
Social network hostname list can be obtained from Social network whitelist guide
Part 1: Cambium cnMaestro configuration
-
Login to your Cambium cnMaestro controller
-
Go to WLANs > Configuration > AAA Servers
-
Authentication Server
-
Host: Kiwire-hostname or Kiwire-Ip
-
Secret: create a secret pass phrase
-
Port: 1812
-
Timeout: 3 seconds
-
Attempts: 1
-
-
Accounting Server
-
Host: Kiwire-hostname or Kiwire-ip
-
Secret: secret same as authentication server
-
Port: 1813
-
Timeout: 3 seconds
-
Attempts: 1
-
Accounting Mode: Start-Interim-Stop
-
Accounting Packet: ticked
-
Interim Update Interval: 1800 seconds
-
-
Advanced Settings
-
NAS-Identifier: AP MAC address with capital letters and colon
-
Dynamic Authorization: ticked
-
Dynamic VLAN: ticked
-
Called Station ID: AP-MAC:SSID
-
-
Omaya 3.0 Administrator > Quick Setup > Dashboard
Documentation
Ubiquiti Networks Documentation > airMAX
Ubiquiti Networks Documentation - airMAX
Getting Started
airMAX – PoE Compatibility Table
airMAX – How to Align airMAX Antennas
airMAX – Securing airOS Best Practices
airMAX – Selecting the Best Channel Width
airMAX – Planning an Outdoor Wireless Link
airMAX – Choosing the Correct Device Firmware
airMAX – Security Types for airMAX Radio Networks
airMAX – Using airView to Find the Best Channel
airMAX – AMC (airMAX Capacity) and AMQ (airMAX Quality)
airMAX – How to Update Device Firmware
airMAX – Initial Radio Setup and Configuration
airMAX – How to Aim a NanoBeam for the Best AC Performance
airMAX – airMAX Priority Setting
airMAX – How to Factory Default the airGateway
airMAX – Which product should I use?
airMAX – ACK Distances for airMAX AC
System Management
airMAX – Activating FCC Revised UNII Rules
airMAX – How to Export and Delete Device Data
airMAX – How to Enable and Test SNMP
airMAX – SSL Certificate Security Alert
airMAX – How to Upgrade the Firmware Via CLI / SSH
airMAX – How to Reset Your Device with TFTP Firmware Recovery
Troubleshooting
airMAX – Troubleshooting an Inaccessible Device
airMAX – Troubleshooting Weak or Fluctuating Signal
airMAX – Troubleshooting Unexpected Reboots
airMAX – Ethernet Negotiation Issues
airMAX – How to Troubleshoot Poor Throughput
airMAX – Testing Throughput with iPerf3
airMAX – Resetting to Factory Defaults Via SSH
airMAX – Station Won’t Connect to Access Point
(ARCHIVED) airMAX – Firmware Image Check Failed. Error Code: -7
Configuration
airMax – Disable Security on AC Devices
airMAX – How to Configure a Point-to-Point Link (Layer 2, Transparent Bridge)
airMAX – Configure a Point-to-Multipoint (PtMP) ISP-Style Access Point
airMAX – How to Configure an Indirect Point-to-Point (PtP) Link (Bridge, Repeater)
airMAX – Management VLAN Examples
airMAX – Long Range PtP Link Mode
airMAX – How to Enable DHCP Options
airMAX – How to Enable Passing of LLDP Packets on airMAX M and AC
airMAX – Traffic Shaping (Rate Limiting) for airMAX Radios
airMAX – How to Set Up RADIUS Server Authentication on airOS Devices (FreeRadius)
airMAX – How to Connect airMAX M Stations to an airMAX AC Access Point
airMAX – How to Configure a PoE Bridge
airMAX – Configure a Long-Range WiFi Client
(ARCHIVED) airMAX – Configure a Wi-Fi Access Point Cluster in AP WDS Repeater Mode
(ARCHIVED) airMAX – Configure a Wi-Fi Access Point
(ARCHIVED) airMAX – Non-airMAX WiFi Connectivity for airMAX Devices