Kiwire 3.0 Administrator - Device & Controller Setup Guide
Kiwire 3.0 Administrator - Device & Controller Setup Guide
Cambium Networks Configuration for Kiwire Hotspot
Cambium Networks Configuration for Kiwire Hotspot
Prerequisites
​
Before integrating the controller with Kiwire, it is necessary that the controller and access point:
-
are connected to the Internet
-
are reachable on the network
-
have an IP address assigned to the a through DHCP or static
Note:
-
Kiwire-hostname or Kiwire-ip can be obtain by contacting our technical support for our cloud customer. For enterprise client the ip will be on premises Kiwire ip address.
-
Social network hostname list can be obtained from Social network whitelist guide
Part 1: Cambium cnMaestro configuration
-
Login to your Cambium cnMaestro controller
-
Go to WLANs > Configuration > AAA Servers
-
Authentication Server
-
Host: Kiwire-hostname or Kiwire-Ip
-
Secret: create a secret pass phrase
-
Port: 1812
-
Timeout: 3 seconds
-
Attempts: 1
-
-
Accounting Server
-
Host: Kiwire-hostname or Kiwire-ip
-
Secret: secret same as authentication server
-
Port: 1813
-
Timeout: 3 seconds
-
Attempts: 1
-
Accounting Mode: Start-Interim-Stop
-
Accounting Packet: ticked
-
Interim Update Interval: 1800 seconds
-
-
Advanced Settings
-
NAS-Identifier: AP MAC address with capital letters and colon
-
Dynamic Authorization: ticked
-
Dynamic VLAN: ticked
-
Called Station ID: AP-MAC:SSID
-
-
Omaya 3.0 Administrator > Quick Setup > Dashboard
Documentation
Ubiquiti Networks Documentation > airMAX > Configuration
Ubiquiti Networks Documentation
airMAX - Configuration
airMax – Disable Security on AC Devices
airMAX – How to Configure a Point-to-Point Link (Layer 2, Transparent Bridge)
airMAX – Configure a Point-to-Multipoint (PtMP) ISP-Style Access Point
airMAX – How to Configure an Indirect Point-to-Point (PtP) Link (Bridge, Repeater)
airMAX – Management VLAN Examples
airMAX – Long Range PtP Link Mode
airMAX – How to Enable DHCP Options
airMAX – How to Enable Passing of LLDP Packets on airMAX M and AC
airMAX – Traffic Shaping (Rate Limiting) for airMAX Radios
airMAX – How to Set Up RADIUS Server Authentication on airOS Devices (FreeRadius)
airMAX – How to Connect airMAX M Stations to an airMAX AC Access Point
airMAX – How to Configure a PoE Bridge
airMAX – Configure a Long-Range WiFi Client
(ARCHIVED) airMAX – Configure a Wi-Fi Access Point Cluster in AP WDS Repeater Mode
(ARCHIVED) airMAX – Configure a Wi-Fi Access Point
(ARCHIVED) airMAX – Non-airMAX WiFi Connectivity for airMAX Devices